Navigation:  Calculation Modules > Analysis > ENERCALC 3D > Ribbons > Tables > Surface Loads

Tables > Surface Loads prompts you with the following dialog.  

 

 

 

It allows you to enter shell surface loads in a spreadsheet.  Each surface load includes the shell ID, the load coordinate system, direction, and magnitude.  The load is always a force in the local or global X, Y or Z directions.  The shell ID must be valid (defined).

 

An empty row is allowed if all rows below it are empty.  Selected rows (whole row must be selected) may be cut by clicking the button “Cut Selected Rows”.