Navigation:  Calculation Modules > ENERCALC 3D > Ribbons > Create > Draw Loads >

Surface Loads

Previous pageReturn to chapter overviewNext page

Create > Draw Loads > Surface Loads prompts you with the following dialog.  

 

FASTFR~1_img125

 

 

It allows you to assign surface loads to selected shells in the model.  You must select a load case to which the surface loads belong. Surface loads may be specified in either the local or global coordinate system.  The loads are surface forces in the X, Y, or Z direction.  Surface load applies to the entire surface of a shell element.

< <