Navigation:  Calculation Modules > Analysis > 2D Frame >

Wood Design

Previous pageReturn to chapter overviewNext page

The 2D Frame module now incorporates wood stress checking according based on ASD or LRFD methods according to NDS methods.

 

Adjustment Factors for Sawn Lumber

 

The module only collects CD or Lambda from the user.

 

The module assumes a value of 1.0 for CM, Ct, Cfu, Ci, Cr and CT.

 

The module calculates values for CL, CF, and CP.  

 

The bearing area factor Cb never comes into play in the functions performed within this module.

 

 

Adjustment Factors for Glued Laminated Timber

 

The module only collects CD or Lambda from the user.

 

The module assumes a value of 1.0 for CM, Ct, Cfu, Cc, CI, and Cvr.

 

The module calculates values for CL, CV, and CP.  

 

The bearing area factor Cb never comes into play in the functions performed within this module.

< <