Moving ENERCALC SEL to a Different Computer |
  
|
Moving ENERCALC SEL to a Different Computer |
|
Follow these simple steps:
1.Internet Deactivate ENERCALC SEL on your current computer.
2.Uninstall ENERCALC SEL from your current computer.
3.Locate ENERCALC data files that you want to move to the new installation and back them up to a portable memory device. These could include:
•Project Files: File extension is “EC6”. Default location is C:\Users\[username]\Documents\ENERCALC Data Files.
•Custom section data files: If you have any custom section data files, they are typically stored in C:\Users\Public\Documents\ENERCALC Common Data Files, and they will have the extension "TPS" and will include _USR_ in the file name, such as EC6_STL_USR_W.TPS.
•User defined load combinations: If you have any user defined load combinations, you will want to copy and move the file named LoadComb.tps, which is typically saved in C:\Users\[username]\Documents\ENERCALC Data Files\.
4.Locate your Product Control Code. IMPORTANT!!!: Use the most recent one that was sent to you, as this establishes the Allowed Version that you will have access to, and the features and functions that will be available.
5.Download the installer: https://install.enercalc.com/ECSEL20_SETUP.EXE
6.Run the installer on your new computer (pasting in the latest PCC in the process).
7.Launch the installed software and use “Internet Activate”.
