> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/training-videos/training-videos/office-hours.md).

# Office Hours

Recordings of ENERCALC's monthly Office Hours webinars, each covering a calculation module or feature.

## October 14, 2026: Project Load Group Builder & Point Load on Slab Module

{% embed url="<https://www.youtube.com/watch?v=xQ30nMO6pVw>" %}

## September 9, 2026: Masonry Beam Module

{% embed url="<https://www.youtube.com/watch?v=XIo6liFJJ6U>" %}

## August 12, 2026: Composite Steel Beam Module

{% embed url="<https://www.youtube.com/watch?v=9uKxzYz98IE>" %}

## July 8, 2026: Restrained Retaining Wall

{% embed url="<https://www.youtube.com/watch?v=nD8w2IgAT_w>" %}

## June 10, 2026: ENERCALC for Revit - Wood Buildings

{% embed url="<https://www.youtube.com/watch?v=sVW1Qb9A2nw>" %}

## May 13, 2026: Wood Column

{% embed url="<https://www.youtube.com/watch?v=kjacMO3dGds>" %}

## April 8, 2026: Section Property Calc + Seismic Wall Anchorage

{% embed url="<https://www.youtube.com/watch?v=v3Vk6QOBXgs>" %}

## March 11, 2026: Concrete Column

{% embed url="<https://www.youtube.com/watch?v=4OZZztqLvsY>" %}

## February 11, 2026: Full Path Load Linking

{% embed url="<https://www.youtube.com/watch?v=sgYJX8ZhdHk>" %}

## January 14, 2026: Steel Beam Module

{% embed url="<https://www.youtube.com/watch?v=SNb-Ba1a3SA>" %}

## December 10, 2025: Wood Beam Module

{% embed url="<https://www.youtube.com/watch?v=NAJa8_JFBWk>" %}

## November 12, 2025: Rebar Development & ASCE 7-22 Live Load Reduction Modules

{% embed url="<https://www.youtube.com/watch?v=uk1ipQDNzNE>" %}

## October 8, 2025: Pile Group Analysis Module

{% embed url="<https://www.youtube.com/watch?v=CXwPhxhN2Xg>" %}

## September 10, 2025: Torsional Analysis of Rigid Diaphragm

{% embed url="<https://www.youtube.com/watch?v=oi1fEQCDbSI>" %}

## August 13, 2025: Masonry Slender Wall Module

{% embed url="<https://www.youtube.com/watch?v=9yiXC4FRmTA>" %}

## July 9, 2025: Cantilevered Retaining Wall Module

{% embed url="<https://www.youtube.com/watch?v=Eeo79gt3tMM>" %}

## June 11, 2025: Soldier Pile Retaining Wall

{% embed url="<https://www.youtube.com/watch?v=-gExuxs-J9I>" %}

## May 14, 2025: Pole Footing Embedded in Soil Module

{% embed url="<https://www.youtube.com/watch?v=yQ4gfBQuU8I>" %}

## April 9, 2025: Miscellaneous Modules

{% embed url="<https://www.youtube.com/watch?v=1h31nXTK2mg>" %}

## March 12, 2025: 2D Frame Module

{% embed url="<https://www.youtube.com/watch?v=_dThI0h0rug>" %}

## February 12, 2025: Composite Steel Beam

{% embed url="<https://www.youtube.com/watch?v=H5tKIYcAQcc>" %}

## January 8, 2025: Concrete Beam Module

{% embed url="<https://www.youtube.com/watch?v=KgWMaZzG7ss>" %}

## December 4, 2024: General Footing Module

{% embed url="<https://www.youtube.com/watch?v=dkRFRCH3qK0>" %}

## November 13, 2024: ENERCALC for Revit

{% embed url="<https://www.youtube.com/watch?v=nE3DL5YtPO4>" %}

## October 9, 2024: Wood Shear Walls

{% embed url="<https://www.youtube.com/watch?v=xxYcBr4ceyk>" %}

## September 11, 2024: Wood Columns

{% embed url="<https://www.youtube.com/watch?v=DZ2tjDxz7fY>" %}

## August 7, 2024: Designing Steel Beams for Bi-axial Bending

{% embed url="<https://www.youtube.com/watch?v=tVJmC6_eNio>" %}

## July 10, 2024: Live and Dynamic Load Linking

{% embed url="<https://www.youtube.com/watch?v=S8U_eU1o1oM>" %}

## June 5, 2024: Timber Toolbox - A Deep Dive Into Wood Beams

{% embed url="<https://www.youtube.com/watch?v=UI2UkJOL6B0>" %}

## May 1, 2024: What's New in Steel Beam and Column Design in ENERCALC

{% embed url="<https://www.youtube.com/watch?v=ZsR7yYGBWb0>" %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/training-videos/training-videos/office-hours.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
