> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/sel-user-manual/calculation-modules/earth-retention/sw-segmental-walls/sw-geogrid-2.md).

# Design Parameters Tab

How to enter soil, embedment, base pad, slope, and factor-of-safety inputs for segmental retaining wall design.

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-3835e4c447e5ccd89d045359a0cc300b94828555%2FClip34.jpg?alt=media)

**Retained Height**: Displays the retained height based on block coursing and geometry entered on the Block & Geogrid tab.

**Embedment**: Depth below grade (on the low side) to top of setting pad. Usually one block course or 1’-0”.

**Base Pad Depth**: Thickness of the base pad.

**Soil Density, Exterior (in-situ)**: Enter the density of the native soil beyond the backfill zone and under the base.

**Soil Density, Interior (backfill)**: Enter the density of the backfill material (typically granular soil or gravel).

**Soil Phi, Exterior (in-situ)**: Enter the angle of internal friction of in-situ soil.

**Soil Phi, Interior (backfill)**: Enter the angle of internal friction of the backfill soil.

**Allowable Soil Bearing Pressure**: Enter the allowable soil bearing pressure.

**Backfill Slope**: Select the backfill slope from the drop-down list box.

**Minimum Acceptable Factors of Safety:** Specify the minimum acceptable factors of safety for each of the different failure modes, or click the reset button to easily reset all values to defaults as per NCMA Table 5-2.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/sel-user-manual/calculation-modules/earth-retention/sw-segmental-walls/sw-geogrid-2.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
