> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/sel-user-manual/calculation-modules/earth-retention/soldier-pile-2/general-tab-2-2/general-tab-2-2-2.md).

# Summary Tab

How to read soldier pile lateral loads, moments, shears, embedment, and status checks on the General tab.

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-6558551d9ae529d24d05629ef7381f99f773c77e%2FClip69.jpg?alt=media)

**Soil Pressure Coefficients:**

Ka (horiz) and Kp (Rankine) are computed automatically when using the Rankine method. Kp (Rankine) is calculated as 1/Ka for a backfill slope of zero.

**Lateral Loads:**

**Pile Pa, lbs**: Total lateral force due to earth pressure.

**Pile Pw, lbs**: Total lateral force due to surcharge if applicable.

**Pile Total lateral, lbs**: Sum of Pa + Pw

**Moments & Shears:**

**Depth to Max M, ft:** Distance below lower grade to point of maximum moment in the pile.

**Mmax in Pile (Service), ft-lbs:** Maximum service level moment in the pile.

**Vmax in Pile (Service), ft-lbs:** Maximum service level shear in the pile.

**Mmax in Pile (Factored), ft-lbs:** Maximum factored level moment in the pile. A factor of 1.6 is used.

**Vmax in Pile (Factored), ft-lbs:** Maximum factored level shear in the pile. A factor of 1.6 is used.

**Deflection:** This is a conditional result.

If the pile has **no** tie-backs, the result will report the deflection at the top of the pile.

If the pile **has** tie-backs, the result will report the deflection at the top of the pile, as well as the extreme deflection and the location where the extreme deflection was found to occur. Refer to the Solver Results tab for more information on how to locate the point of extreme deflection.

**Embedment:**

Reports the required pile embedment based upon allowable passive pressure, the specified safety factor and the applied active pressure. The result is further itemized into the length of embedment that is considered effective for passive resistance and the portion that is neglected (if any). Finally, the results report the embedment used for documentation purposes.

**Reactions:** This is a conditional result.

If the pile has **no** tie-backs, this area will be blank.

If the pile **has** tie-backs, the result will report the tie-back reactions and the base reaction as determined by the stiffness analysis.

**Status Checks:**

Reports Mu (or Ma), phiMn (or Mn/Omega), the ratio, and an OK/NG status.

Reports Vu (or (Va), phiVn (or Vn/Omega), the ratio, and an OK/NG status.

Reports an OK/NG status on the Embedment.

Soldier Pile Section documents the selected section for the pile.

Lagging Section documents the selected section for the lagging.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/sel-user-manual/calculation-modules/earth-retention/soldier-pile-2/general-tab-2-2/general-tab-2-2-2.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
