> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/sel-user-manual/calculation-modules/earth-retention/soldier-pile-2/general-tab-2.md).

# Lateral Earth Pressure Tab

How to set lateral earth pressure, passive pressure, and surcharge inputs for a soldier pile wall.

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-9dc6faf6cb0a3eaba65a3300f225e25f9d3d3a69%2FClip68.jpg?alt=media)

**Lateral Earth Pressure Method:** This is a conditional input. It is only available when tie-backs are **not** used. When it is available, it allows the use of Rankine Active Pressure or Equivalent Fluid Pressure methods. When tie-backs are used, the pressure is applied as described on the Soil Pressure Reference tab.

**EFP:** Equivalent Fluid Pressure of the retained material, usually obtained from the geotechnical engineer.

**Soil Phi, degrees:** Angle of internal friction of the retained material, usually obtained from the geotechnical engineer.

**Soil Density, pcf:** Density of the retained soil, usually 100 to 130 pcf.

**Surcharge top of soil at retained side, psf:** Surcharge on upper grade such as for equipment, materials, or contingencies.

**Backfill Slope, degrees:** Slope of the backfill measured in degrees from horizontal.

**Passive Pressure, psf/ft:** Passive pressure in pcf. When using Rankine active soil pressure method, passive pressure is calculated as (1/Ka)\*(soil density). When using EFP, the passive pressure is a user input.

**Apply S.F. to Passive Pressure:** Safety factor that will be applied to the above passive pressure, typically suggested by the geotechnical engineer.

**Neglect this height of Passive Pressure @ Top:** Allows a specified height of passive pressure to be ignored for resistance, such as if the soil was likely to be frost disturbed or otherwise unsuitable to resist lateral pressure. Note that this input is specified in units of inches.

**Multiplier on Ka\*Gamma\*H:** This is a conditional input. It is only available when tie-backs **are** used, and it allows the user to fine tune the pressure value. The Soil Pressure Reference tab shows how the soil pressure distribution is developed.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/sel-user-manual/calculation-modules/earth-retention/soldier-pile-2/general-tab-2.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
