> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/sel-user-manual/calculation-modules/analysis/torsional-analysis-of-rigid-diphragm/torsional-analysis-of-rigid-diaphragm-theory/taord-worked-example-1.md).

# Worked Example 1

Compute the forces on the shear walls of the one-story, rigid diaphragm, shear wall building. See Figure 4:

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-968b23712fd4ee92a5bd5c6dcc029ed00f2aa7ae%2Ftaord-theory-figure-4.png?alt=media)

Figure 4: Example Problem #1 - Plan View

The walls are of reinforced concrete and the roof diaphragm and foundations are rigid compared with the walls. Neglect the influence of wall thickness on dimensions.

Wall assembly A has an angle cross section. For design purposes, the shear center is at the apex. The stiffness coefficients are generated by inverting the element flexibility matrix. The element flexibility matrix for wall A is generated by applying independent unit loads in the Y and Z directions and computing the corresponding displacements. Neglecting the influence of the wall thickness, the centroid of the section is readily found.

$$\bar{y} = \bar{z} = \frac{20, \text{ft.} \cdot (10, \text{ft.})}{20, \text{ft.} + 20, \text{ft.}} = 5, \text{ft.}$$

The moments of inertia, neglecting small quantities, are calculated as follows (Note $$I\_{yy} = I\_{zz}$$ and $$I\_{yz} = I\_{zy}$$):

$$I\_{yy} = \frac{8}{12} (20)^3 \left( \frac{1}{12} \right) + 2 \left( \frac{8}{12} \right)(20)(5)^2 = 1,111, \text{ft}^4$$

$$I\_{yz} = \frac{8}{12}(20)(+5)(+5) + \frac{8}{12}(20)(-5)(-5) = 666, \text{ft}^4$$

Recall that the moments of inertia are second order tensors, and thus a coordinate transformation may be accomplished using a Mohr’s circle, see Figure 5:

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-a37ece0848ec5e67fd6f805a10f1cf8c63428fd0%2Ftaord-theory-figure-5.png?alt=media)

Figure 5: Mohr's Circle

$$I\_1 = I\_{yy} - I\_{yz} = 1,111 - 666 = 445, \text{ft.}^4$$

$$I\_2 = I\_{yy} + I\_{yz} = 1,111 + 666 = 1,777, \text{ft.}^4$$

The cross-section area is as follows:

$$A = \frac{8}{12} (20) + \frac{8}{12} (20) = 26.67, \text{ft}^2$$

The stiffness coefficients for wall assembly A can now be computed. Recall that the displacement-force relationships can be expressed in matrix rotation (force method) as follows:

$$\begin{bmatrix} U\_y \ U\_z \end{bmatrix} = \begin{bmatrix} A\_{yy} & A\_{yz} \ A\_{zy} & A\_{zz} \end{bmatrix} \begin{bmatrix} V\_y \ V\_z \end{bmatrix}$$

Where $$U\_y$$ and $$U\_z$$ are the displacements in the Y and Z direction due to unit forces $$V\_y$$ and $$V\_z$$. The flexibility coefficient $$A\_{yz}$$ is the displacement in the Y direction due to a unit force in the Z direction. See Figure 6:

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-c54d6dbc9a6ef03720e2fbeb6c98bd47f872aab0%2Ftaord-theory-figure-7.png?alt=media)

Figure 6: Example Problem #1 - Wall Element A w/ Unit Load Vy

Recall equation 4 for the displacement of a wall, thus:

$$\Delta U\_{y1} = \frac{V\_{y1}}{E} \left\[ \frac{(12)^3}{3(1,777)} + \frac{2.64(12)}{26.67} \right] = \frac{1.512 V\_y \sin\phi}{E}$$

$$\Delta U\_{y2} = \frac{V\_{y2}}{E} \left\[ \frac{(12)^3}{3(445)} + \frac{26.4(12)}{26.67} \right] = \frac{2.482 V\_y \cos\phi}{E}$$

Now,

$$U\_{zy1} = \Delta U\_{y1} \cos\phi = 1.512 V\_y \sin\phi \cos\phi / E = 0.756 V\_y / E$$

$$U\_{yy1} = \Delta U\_{y2} \sin\phi = 1.512 V\_y \sin\phi \cos\phi / E = 0.756 V\_y / E$$

$$U\_{zy2} = \Delta U\_{y2} \sin\phi = 2.482 V\_y \cos\phi \sin\phi / E = 1.24 V\_y / E$$

$$U\_{yy2} = \Delta U\_{y2} \cos\phi = 2.482 V\_y \cos\phi \cos\phi / E = 1.241 V\_y / E$$

Next,

$$A\_{yy} = U\_{yy1} + U\_{yy2} = 1.997 V\_y / E$$

$$A\_{zy} = U\_{zy1} - U\_{zy2} = -0.485 V\_y / E$$

Similarly from Figure 7:

$$A\_{yz} = -0.485 V\_z / E$$

$$A\_{zz} = 1.997 V\_z / E$$

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-c54d6dbc9a6ef03720e2fbeb6c98bd47f872aab0%2Ftaord-theory-figure-7.png?alt=media)

Figure 7: Example Problem #1 - Wall Element A w/ Unit Load Vx

The flexibility matrix is now

$$\begin{bmatrix} U\_y \ U\_z \end{bmatrix} = \frac{1}{E} \begin{bmatrix} 1.997 & -0.485 \ -0.485 & 1.997 \end{bmatrix} \begin{bmatrix} V\_y \ V\_z \end{bmatrix}$$

The stiffness matrix equation is generated by inverting the flexibility matrix, as follows.

Recall to invert a 2x2 matrix of the form:

$$\[A] = \begin{bmatrix} a\_{11} & a\_{12} \ a\_{21} & a\_{22} \end{bmatrix}$$

Therefore,

$$\[A]^{-1} = \frac{1}{a\_{22}a\_{11} - a\_{12}a\_{21}} \begin{bmatrix} a\_{22} & -a\_{12} \ -a\_{21} & a\_{11} \end{bmatrix}$$

$$= \frac{1}{(1.997)^2 - (-0.485)^2} \begin{bmatrix} 1.997 & -(-0.485) \ -(-0.485) & 1.997 \end{bmatrix}$$

Thus:

$$\begin{bmatrix} V\_y \ V\_z \end{bmatrix} = E \begin{bmatrix} 0.532 & 0.129 \ 0.129 & 0.532 \end{bmatrix} \begin{bmatrix} U\_y \ U\_z \end{bmatrix}$$

Where:

$$K\_{yy} = K\_{zz} = 0.532 E$$

$$K\_{yz} = K\_{zy} = 0.129 E$$

The stiffness coefficients for walls B and C are easier to generate because $$K\_{yz}=0$$. The centroid of the section is at mid-length. The moment of inertia is as follows:

$$I\_{zz}=0$$

$$I\_{yy} = \frac{8}{12} (10)^3 \frac{1}{12} = 56, \text{ft.}^4$$

The cross-sectional area is,

$$A = \frac{8}{12} (10) = 6.67 \text{ ft.}^2$$

Recall equation 4 for the displacement for a wall,

$$\Delta U\_y = \frac{V\_y}{E} \left\[ \frac{(12)^3}{3(56)} + \frac{2.64(12)}{6.67} \right] = \frac{15.04}{E} V\_y$$

Now,

$$A\_{yy} = \Delta U\_y$$

Next,

$$U\_y = \left\[ \frac{15.04}{E} \right] V\_y$$

Therefore,

$$V\_y = 0.0665E \cdot U\_y$$

Thus,

$$K\_{yy} = 0.0665E$$

The location of the coordinate axis system can now be computed. See Figure 8. Recall Equation 31 and 32, divide thru by E.

$$\bar{z} (0.532 + 0.0665 + 0.0665) - \bar{y} (0.129) = 80 (0.532) - 0$$

$$\bar{z} (0.129) - \bar{y} (0.532) = 80 (0.129) - 0$$

Combine terms and multiply by opposite $$\bar{ y }$$ coefficients,

$$\bar{z} (0.665)(0.532) - \bar{y} (0.129)(0.532) = 80 (0.532)(0.532)$$

$$- \bar{z} (0.129)(0.129) + \bar{y} (0.532)(0.129) = -80 (0.129)(0.129)$$

Next,

$$\bar{z} (0.337) = 21.31$$

Thus,

$$\boxed{ \bar{z} = 63.23 }$$

Now,

$$63.23 (0.665) - \bar{y} (0.129) = 80 (0.532)$$

Therefore,

$$\boxed{ \bar{y} = -3.96 }$$

The location of the coordinate axis system, the center of rigidity (CR), is now known. See Figure 8:

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-be18da8961fa380b49e0507911a0cbd9c0f043f5%2Ftaord-theory-figure-8.png?alt=media)

Figure 8: Example Problem #1 - Center of Rigidity and Wall Loads

The following loads are applied thru the center of mass (CM).

$$P\_y = 10 \text{ kips}$$

$$P\_z = 10 \text{ kips}$$

The resulting torsional moment:

$$T\_p = zP\_y + yP\_z$$

$$T\_p = 23.96 (10) + 23.23 (10) = 471.9 \text{ ft-kips}$$

The torsional rigidities of the individual elements about their own shear centers (J) is zero. The sum of the torsional resistance of the entire system ($$J\_p$$) is as follows (recall Equation 26).

$$J\_p = (16.77)^2 (0.532) E + 2 (63.23)^2 (0.0665) E + (3.96)^2 (0.532) E - 2 (3.96)(16.77)(0.129) E = 672.56 E$$

The displacements may now be computed. Recall Equation 23 and 24.

$$10 = \Delta\_y (0.532 + 0.0665 + 0.0665) E + \Delta\_z (0.129) E$$

$$10 = \Delta\_y (0.129) E + \Delta\_z (0.532) E$$

Combine terms and multiply by opposite $$\Delta\_z$$ coefficients,

$$10 (0.532) = \Delta\_y (0.665)(0.532) E + \Delta\_z (0.129)(0.532) E$$

$$10 (0.129) = \Delta\_y (0.129)(0.129) E + \Delta\_z (0.532)(0.129) E$$

Thus,

$$4.03 = \Delta\_y (0.337) E$$

Therefore,

$$\Delta\_y = \frac{11.95}{E}$$

Now,

$$10 = \frac{11.95}{E} (0.129) E + \Delta\_z (0.532) E$$

Thus,

$$\Delta\_z = \frac{15.89}{E}$$

Next, recall Equation 25

$$471.9 = \Delta\_\theta (672.56) E$$

Thus,

$$\Delta\_\theta = \frac{0.702}{E}$$

The forces on the walls may now be computed. See Figure 8. Recall equation 14. For wall A,

$$F\_y = 0.532E \left( \frac{11.95}{E} \right) + 0.129E \left( \frac{15.89}{E} \right) + \[3.96 (0.129E) - 16.77 (0.532E)] \left( \frac{0.702}{E} \right)$$

$$\boxed{ F\_y = 2.50 }$$

$$F\_z = 0.129E \left( \frac{11.95}{E} \right) + 0.532E \left( \frac{15.89}{E} \right) + \[3.96 (0.532E) - 16.77 (0.129E)] \left( \frac{0.702}{E} \right)$$

$$\boxed{ F\_z = 9.96 }$$

For walls B and C,

$$F\_y = 0.0665E \left( \frac{11.95}{E} \right) + \left\[ 0 - (-63.23)(0.0665) \right] \left( \frac{0.702}{E} \right)$$

$$\boxed{ F\_y = 3.75 }$$

$$\boxed{ F\_z = 0 }$$

Check load distribution,

$$\Sigma F\_z = 0; \quad \ 10 = 10 \quad \quad \therefore\text{OK}$$

$$\Sigma F\_y = 0; \quad \ 10 = 2.5 + 3.75 + 3.75 \quad \quad \therefore\text{OK}$$

$$\Sigma T\_p = 0; \quad \ 471.9 = 63.23 (3.75 + 3.75) - 2.5 (16.77) + 10 (3.96) \quad \quad \therefore\text{OK}$$

Note that an alternate approach would be to design and construct two separate walls instead of the one wall assembly A. In this case the lateral load distribution would proceed without any cross-product terms in the stiffness matrix. The center of rigidity would be at

$$\bar{z} = 53.73 \quad \text{and} \quad \bar{y} = 0$$

for this case versus

$$\bar{z} = 63.23 \quad \text{and} \quad \bar{y} = -3.96$$

for the example problem as shown. Also note that the negative torsional contributions were added algebraically to the appropriate wall element for a mathematically correct solution versus neglecting these contributions as required in some building codes.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/sel-user-manual/calculation-modules/analysis/torsional-analysis-of-rigid-diphragm/torsional-analysis-of-rigid-diaphragm-theory/taord-worked-example-1.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
