> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/sel-user-manual/calculation-modules/analysis/2-d-frame-analysis/joints/joint-loads.md).

# Joint Loads

How to add, edit, and delete loads applied to joints in a 2D frame model.

## Joint Loads

This tab provides the input locations for all loads applied to the joints in the frame.

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-fdffcf483bc58fc4514ae4fb8bfd469b591d023e%2Fclipp313.gif?alt=media)

**Select Joint**: list is where you select the joint for which you wish to view/modify loads. This selection controls what is visible in the other two sections.

**Applied Loads for Joint**: is where you assign and edit the loads applied to that joint.

## Adding & Deleting Loads

To add a joint load just click the \[**Add**] button and a new load entry line will be added at the bottom of the list for the currently selected joint.

To delete a load just click on the load line you wish to delete and click the \[**Delete**] button.

## Editing Joint Load Information

Click on any data item in the joint load list, and it will switch into an editing mode. See the image below where we have clicked on the Dead load column in the first line in the list of loads associated with joint 4.

![](https://3283832020-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiBJmBoewuy4ZcBC7RF3m%2Fuploads%2Fgit-blob-8a756dc353b3032a1dd29218a3b709bb3806ea55%2Fclip0332_was_BMP.jpg?alt=media)

You can type in a numeric value or use the "spin" buttons to change the value by a fixed decimal amount.

To finish the entry either press \[**Tab**], \[**Enter**] or click on another data item in the list.

**When your entry is completed the entire frame will be recalculated if the Auto Calculate option is selected.**

**Note:** If a load is applied in the same direction that a Joint Restraint is specified, that load will immediately be "absorbed" by the joint restraint, so it will not have any effect on the frame.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/sel-user-manual/calculation-modules/analysis/2-d-frame-analysis/joints/joint-loads.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
