> For the complete documentation index, see [llms.txt](https://enercalc.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enercalc.com/docs/sel-faq/using-the-software/calculation-modules/retaining-walls/cantilevered-retaining-wall/no-more-reduction-in-lap-splic.md).

# No more reduction in lap splice length or development length

Explains why lap splice and hooked embedment lengths cannot be reduced for excess reinforcing under ACI 318.

## Why can't I select "Reduce lap splice by stress ratio" or "Reduce hooked embedment by As req'd / As provided" on the Stem tab?

ACI 318 does not permit reducing hooked embedment length using the `As req'd / As provided` ratio.

ACI 318 also prohibits reducing development length for excess reinforcing when calculating lap splice lengths. The restrictions depend on the selected design standard.

### ACI 318-14

| Section       | Requirement                                                                                                       |
| ------------- | ----------------------------------------------------------------------------------------------------------------- |
| §25.5         | Covers lap splices.                                                                                               |
| §25.5.1.4     | Prohibits reducing development length for excess reinforcing when calculating lap splice lengths.                 |
| §25.4.3       | Covers development of standard hooks in tension.                                                                  |
| §25.4.10.2(a) | Prohibits reducing development length for excess reinforcing at noncontinuous supports.                           |
| §25.4.10.2(b) | Prohibits reducing development length for excess reinforcing where anchorage or development for `fy` is required. |

### ACI 318-19

| Section       | Requirement                                                                                                                        |
| ------------- | ---------------------------------------------------------------------------------------------------------------------------------- |
| §25.5         | Covers lap splices.                                                                                                                |
| §25.5.1.4     | Prohibits reducing development length for excess reinforcing when calculating lap splice lengths.                                  |
| §25.4.3       | Covers development of standard hooks in tension.                                                                                   |
| §25.4.10.2(a) | Prohibits reducing development length for excess reinforcing at noncontinuous supports.                                            |
| §25.4.10.2(b) | Prohibits reducing development length for excess reinforcing where anchorage or development for `fy` is required.                  |
| §25.4.10.2(d) | Prohibits reducing development length for excess reinforcing for hooked, headed, and mechanically anchored deformed reinforcement. |

### ACI 318-25

| Section       | Requirement                                                                                                                        |
| ------------- | ---------------------------------------------------------------------------------------------------------------------------------- |
| §25.5         | Covers lap splices.                                                                                                                |
| §25.5.1.4     | Prohibits reducing development length for excess reinforcing when calculating lap splice lengths.                                  |
| §25.4.3       | Covers development of standard hooks in tension.                                                                                   |
| §25.4.10.2(a) | Prohibits reducing development length for excess reinforcing at noncontinuous supports.                                            |
| §25.4.10.2(b) | Prohibits reducing development length for excess reinforcing where anchorage or development for `fy` is required.                  |
| §25.4.10.2(d) | Prohibits reducing development length for excess reinforcing for hooked, headed, and mechanically anchored deformed reinforcement. |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enercalc.com/docs/sel-faq/using-the-software/calculation-modules/retaining-walls/cantilevered-retaining-wall/no-more-reduction-in-lap-splic.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
