Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Difficulty with Internet Activation

How to troubleshoot ENERCALC SEL Internet Activation problems caused by antivirus, firewalls, VPNs, and certificate inspection.

Internet Activation issues usually result from a network communication problem. Fortunately these issues are usually easy to fix, but they may be most efficiently handled by an IT pro. If you have an IT pro, please feel free to have them contact us. If you don’t have an IT pro, read on.

NOTE: The Internet Activation server continually runs self-diagnostics, and restarts itself within four minutes if an issue is detected. Any issue with the server will commonly resolve itself within a few minutes, and the easiest fix is often to try Internet activating again.

Activation difficulties commonly boil down to a communication issue between your computer and the Internet Activation system. These issues generally fall into one of three categories:

  • Antivirus software is blocking proper communication.

  • A firewall is blocking proper communication.

  • Ad-blocking software and “firewall boosters” can cause communication issues.

Check the following:

  • Disconnect from your VPN, then try Internet Activation again.

  • Check your firewall and antivirus software. Verify that these sites are permitted or trusted on ports 80 and 443:

    Domain
    AWS region

    enercalc.net

    Virginia, US-East-1

    enercalcwest.com

    California, US-West-1

    enercalcpnw.com

    Oregon, US-West-2

    enercalceast.com

    Virginia, US-East-1

    enercalcmidwest.com

    Ohio, US-East-2

    enercloudeurope.com

    Frankfurt, eu-central-1

    enercalcindia.com

    Mumbai, ap-south-1

  • Build 10.19 and later uses HTTPS for activation. Use the domain name, such as enercalc.net, rather than an IP address.

  • Install the latest available SEL build from the SEL installer.

SEL makes REST API calls over HTTPS to enercalc.net for even KW numbers. It uses enercalcwest.com for odd KW numbers. This load-balancing pattern began with the February 2024 build.

enercalcmidwest.com is a third activation server for the Midwestern United States. As of early 2025, SEL doesn't reference it automatically. To force SEL to use this server, set SOFTWARE\Enercalc\v20\act_force_ohio to 1.

If your site uses SSL/TLS introspection or in-house packet inspection, add your internal root certificate to C:\Program Files (x86)\ENERCALC_20\caroot.pem. Otherwise, Internet Activation and other ENERCALC REST API calls fail. Add the certificate at the beginning or end of the file. Windows protects the C:\Program Files (x86)\ENERCALC_20\ folder, so you need administrator access.

Last updated

Was this helpful?